Skanemejerier Dairy, based in Malmo, Sweden, used a 2-liter capacity blow-molded bottle when it launched the Asen brand milk juice. The raw materials for this bottle are Eco-Lean resin with high calcium carbonate content and high density polyethylene. The content of petroleum raw materials in the new-type packaging bottles is less than 40%, and the environmental protection performance is greatly improved, and the additives therein also help to increase the cooling rate and increase the hardness of the bottles.
The above-mentioned Swedish dairy company is putting new types of bottles into the beverage market, which uses cartons as the main packaging for milk juice. Ecolean resin is a product of Ecolean AB (Helsingborg, Sweden). The company used a mixed blow molding process to make Ecolean resin into 60-g bottles. Prior to blow molding, powdered calcium carbonate was mixed with a high density polyethylene resin to make a mother gum.
Mr. Olson from Ecolean AB said: “Adding calcium carbonate can speed up the cooling rate and make the bottle body hardness exceed that of high density polyethylene with 100%. The product shelf life is not affected.†But the last point is not yet Get confirmed by the dairy company.
The new environmentally-friendly, above-mentioned resin hybrid material was originally used by Skane to produce Proriva Active brand beverage bottles. According to Mr. Olsen, the above-mentioned new type of packaging material has been approved as a packaging material that can be contacted with food in Sweden. It also enjoys the same product status throughout the EU and is highly valued. Although only raw materials approved by the U.S. Food and Drug Administration are used in the production of Ecolean resins, not all materials have been tested to meet US Food and Drug Administration standards. The company claims Keller, who has a relationship with the U.S. Food and Drug Administration.
The Heckman (based in Washington, D.C.) law firm had a good impression of the company.
Last year, Skane bought another milk company that sells products in two-liter polyethylene bottles. Ms. Birdson said: "After we acquired that company, we decided to change the original bottle to an Ecolean bottle, and at the same time began to expand the milk sales market."
The above-mentioned Swedish dairy company is putting new types of bottles into the beverage market, which uses cartons as the main packaging for milk juice. Ecolean resin is a product of Ecolean AB (Helsingborg, Sweden). The company used a mixed blow molding process to make Ecolean resin into 60-g bottles. Prior to blow molding, powdered calcium carbonate was mixed with a high density polyethylene resin to make a mother gum.
Mr. Olson from Ecolean AB said: “Adding calcium carbonate can speed up the cooling rate and make the bottle body hardness exceed that of high density polyethylene with 100%. The product shelf life is not affected.†But the last point is not yet Get confirmed by the dairy company.
The new environmentally-friendly, above-mentioned resin hybrid material was originally used by Skane to produce Proriva Active brand beverage bottles. According to Mr. Olsen, the above-mentioned new type of packaging material has been approved as a packaging material that can be contacted with food in Sweden. It also enjoys the same product status throughout the EU and is highly valued. Although only raw materials approved by the U.S. Food and Drug Administration are used in the production of Ecolean resins, not all materials have been tested to meet US Food and Drug Administration standards. The company claims Keller, who has a relationship with the U.S. Food and Drug Administration.
The Heckman (based in Washington, D.C.) law firm had a good impression of the company.
Last year, Skane bought another milk company that sells products in two-liter polyethylene bottles. Ms. Birdson said: "After we acquired that company, we decided to change the original bottle to an Ecolean bottle, and at the same time began to expand the milk sales market."
BNF HARDWARE CO., LTD , https://www.bnfhandles.com